On the main Oil Change window, click
Options, then select the Scan tab.
Click Enable background scan of
local hard drive(s). The other fields become active.
In the Frequency box, click the down
arrow and select the time interval for each scheduled
scan.
In the Time box, type the starting
time you want the scan to start. Be sure to type AM or PM
after the time.
If you are using Oil Change in a country that uses the
24-hour format, you do not need to enter AM or PM.
Click Apply, then click OK.
Note
Your computer needs to be on and Oil
Change should be closed for the scheduled scan to take place.
